Mode: Store & Forward
Cut-through (equal link speed)
Packet buffer size: 512 Kbits
Jumbo Frame size: 16 KBytes
4Gbps
1Mbit
8K
10KBytes
1Mbit
8K
10KBytes
Same link speed for copper & fiber ports
PWR, Fiber(1000, LNK/ACT), RJ45 (1000, LNK/ACT), ALM (Alarm), PWR, L/A, 1000, 100, 16KB
Jumbo Frame size: 10K
MAC table size: 8K
Fabric: 4Gbps
Packet buffer: 1Mbit
Device Monitoring: LFS (Link Fault Signalling)
Device Management: LLB (Line Loopback)
Security: Port Isolation
MAC table size: 8K
Fabric: 4Gbps
Packet buffer: 1Mbit
Device Monitoring: LFS (Link Fault Signalling)
Device Management: LLB (Line Loopback)
Security: Port Isolation
Auto MDI/MDI-X
PWR, Fiber(1000, LNK/ACT), RJ45 (1000, LNK/ACT),
ALM (Alarm)
16KB
1: Link Fault Signal
2: LLB (Local Loopback)
3: RLB(Remote Loopback)
4: SFP Speed
PWR, Fiber(1000, LNK/ACT), RJ45 (1000, LNK/ACT),
ALM (Alarm)
16KB
1: Link Fault Signal
2: LLB (Local Loopback)
3: RLB(Remote Loopback)
4: SFP Speed
Metal Case
0ºC~50ºC (32ºF~122ºF)
-25ºC~70ºC (-13ºF~158ºF)
10% to 80% RH
5% to 90% RH
180 g (0.4 lb)
86.2 x 23.4 x 59.4 mm (3.4 x 0.92 2.34 in)
0ºC~50ºC (32ºF~122ºF)
-25ºC~70ºC (-13ºF~158ºF)
10% to 80% RH
5% to 90% RH
180 g (0.4 lb)
86.2 x 23.4 x 59.4 mm (3.4 x 0.92 2.34 in)
Auto MDI/MDI-X
Auto-negotiation,NWay support on RJ45
Link Fault Signaling
Device DIP switches allow multiple configuration options
Remote and local loopback testing
LEDs for at-a-glance device status
Auto-negotiation,NWay support on RJ45
Link Fault Signaling
Device DIP switches allow multiple configuration options
Remote and local loopback testing
LEDs for at-a-glance device status
12V DC
47 to 63Hz
2.16W
Current 0.23A @ 12V
0ºC~50ºC (32°F~122°F)
-25ºC~70ºC (-13°F~158°F)
10% to 80% RH
5% to 90% RH
47 to 63Hz
2.16W
Current 0.23A @ 12V
0ºC~50ºC (32°F~122°F)
-25ºC~70ºC (-13°F~158°F)
10% to 80% RH
5% to 90% RH
